Rolling Gates Staten Island Roll Doors Staten Island
Rollup Doors and Gates New York
Rolling Gates Staten Island Rollup Doors Staten Island
Before we will start explaining about the Security rollup doors in Staten Island, and the ways to deal with the possible malfunctions, we first like to make a clear safety warning, which apply to all types of “roller shutter” or rollup doors: It doesn’t matter if it is a busted overhead door in Richmond County, or a garage door repair in Staten Island, if your “roller shutter” is busted, out of its tracks, if it is stuck half way down or half way open, or if the rollup’s operator can’t move the shutter, the best thing for you to do will be to get in touch with a Security rollup door specialist in Staten Island to fix it for you. Do not try and force the shutter to move, and for sure do not try to repeatedly use the operator to move the gate. Such attempts can result with bigger damage, and at the same time you may get hurt by a heavy commercial shutter like some of the roller shutters in Staten Island and near Staten Island City are.
Why roller shutters in Staten Island get stuck?
There may be many possible reasons why a “roller shutter” or a Security rollup door near Staten Island is not moving. We will list few of them bellow. Please keep on mind that this is only a partial list, since the reasons for a security rollup door near Staten Island that doesn’t work properly are almost endless.
There is no electricity power my rollup’s motor in Staten Island: Sometime the rollup’s motor doesn’t receive electricity due to electric problem, and as we all know, a security rollup door operator cannot work if it doesn’t receive electricity. If this is the case, you will need to contact an electricians near Staten Island to come and check the electricity connection to your “roller shutter”. Electricity problems for “roller shutter” in NYC can occur due to different reasons, and they are not uncommon. In the meantime, some Security rollup doors near Staten Island can be operated manually until the electrician will come and fix the issue.
My roller door in Staten Island is stuck half way, and refuse to move: This is a common problem, which we are dealing with almost on a daily base when we repair stuck Security rollup door in NYC. It is hard to explain what the specific reason is why your “roller shutter” near Staten Island is stuck half way, since we need to physically check the gate, and locate the problem. Using excessive force to make the gate work is not the right way to solve the problem, and if you will insist and try to force a Security rollup door to move, you can easily break other parts, or the gate can crush and create damage to the property or even hurt you. The best thing for you to do will call a roller shutter technician Staten Island to come and fix the problem for you.
My gate in in Staten Island came out of its tracks. First we want to make it clear that if your roller shutter near Staten Island is out of its tracks, there is a reason why it happened. A roller shutter which operate in a smooth and safe way, just like every gate near Staten Island should, is not supposed to go out of the tracks for no reason. If your roller shutter near Staten Island did went out of tracks, it may be due to many reasons, such as:
Someone forgot to remove the lock before trying to open the gate.
Someone left something bellow the gate when the gate was closing.
Someone hit the gate with a car or a track.
No one maintained the gate for a long time.
And many more reasons that change from one case to another, and that can lead your Security rollup door near Staten Island out of its tracks. Repairing a “roller shutter” in NYC which went out of tracks is not something that you should try and repair in Do It Yourself, even if it may seem simple to fix. Repairing a roller stutter gate near Staten Island which went out of its tracks can be a complicated and dangerous work, and sometime involve certain parts like new slats or new parts that you cannot find at a typical location like Home Depot.
Big Apple Roll Up Doors Gates of New York New York offer same day repair for out of tracks roller shutters and “roller shutter” in Staten Island New York. We have technicians who specialize in all types of Security rollup doors in overhead doors repairs, and they can fix your busted Security rollup door near Staten Island today.
The rollup’s motor can barely open the gate: When it might seem to you that rollup’s motor in Staten Island cannot open the gate, you may assume that there is something wrong with the roller shutter. But you should know that not every time that a “roller shutter” operator near Staten Island cannot lift the gate, it is necessarily indicate that there is something wrong with the rollup’s motor itself. Many times the problem lay in the gate itself like a busted or weak spring, and it affects the way the gate operate. The exact reason can only be determined by inspecting the gate and the operator by a trained “roller shutter” repairman near Staten Island.
Why it became difficult to open my roller door in Staten Island manually? After many years of using a roll gate near Staten Island manually, whether with a chain system or if it is a push-up gate, some of the gate’s parts like the spring become lose, break, or partly break. There are many parameters that can affect your gate and the way it operate, but the main reason will always remain in the answer to the question: How often did you maintain your roller shutter near Staten Island? Greasing the gate, reinforce it, and making sure that there are no lose or busted parts every 6 months is what guarantee that your “roller shutter” near Staten Island will continue working for a long time.
How often a security rollup door in NYC need to be maintained?
This is an important question, since there many different “roller shutter” near Staten Island. The answer to that question require to answer other questions about your roller shutter in NYC such as:
How often do you use your “roller shutter” near Staten Island?
Does your roller shutter is installed inside or outside?
When was roller door in Staten Island installed?
Is it a commercial or residential roller shutter?
Is it a motorized roller door, or a manual one?
Is it a steel roller door (Some roller doors in Staten Island are made from Aluminum)?
As you can see, there are many calculation that need to be made in order to determine how often a security rollup door near Staten Island need to be tuned. But to give you a general answer to that question, we would say that we recommend to maintain a Security rollup door near Staten Island every six months. But once again, every gate need to be maintained. Whether it is a “roller shutter” in Queens, an overhead garage door in Rockland, or a rolling gate in Manhattan New York they all need to be greased and inspected every 6 months, to ensure that they will continue to work in a safe way in the future, and to make sure that you won’t have to contact a Security rollup door specialist in Staten Island anytime soon.
Should I fix roller shutter in Staten Island or replace it with new one?
We can fix most Security rollup doors in Brooklyn. A good roller shutter in NYC, which was built from strong materials, and that was installed by a professional roller shutter installer in NYC, should work for 30 years and even more. And repairing “roller shutters” near Staten Island is something we do every day, and we rarely recommend to replace the gate and install a new one. But sometime the condition of the gate in NY is so severe that we will recommend to remove the gate and replace it with a new gate.
In general we will say that if we see a roller shutter near Staten Island that repairing it is going to cost more or almost the same as completely replacing it, we will recommend a new gate. Or if fixing the gate mean that the gate will not be a hundred percent safe for use, we will not repair it, and we will recommend you to replace it with a new “roller shutter”.
We offer rollup doors repair services near Staten Island, and new Security rollup doors installation services. So whatever need to be done in order to make your gate working again, we can do it. We repair and install commercial, industrial and residential “roller shutters” near Staten Island, and with our same day service, you won’t have to worry about long waiting, since we have the ability to make your gate working again today.
Why should I choose to install a “roller shutter” near Staten Island?
There is a reason why most store fronts near Staten Island are protected by a “roller shutter”. The “roller shutters” are a great solution for stores near Staten Island how need protection for their store, and at the same time they need a security rollup door that will be easy to operate, and that will not take space during the busy working hours of stores near Staten Island. It doesn’t matter if it is a “roller shutter” for a warehouse in Manhattan New York, or a residential garage door repair Staten Island, the “roller shutters” are considered a great solution for stores near Staten Island.
As you can see in our roller shutters and gates portfolio, there are many types of “roller shutters” in New York City, and each one should be able to locate the right gate for their store front. We supply and repair “roller shutters” near Staten Island, whether you are looking for a push up gate repair, or a new grill see-through gate installation, we are the answer to all your gating solutions near Staten Island.
Where can I buy parts for my “roller shutter” near Staten Island?
There are few garage door suppliers near Staten Island, and they can supply you with different parts for your roller shutter like slats, bottom bar, rollup’s motor, tracks and more. Unfortunately, we do not supply parts for “roller shutters” near Staten Island. We used to do that, but we have learned that sometime it is better to avoid that due to different reasons. We would like to give an example of someone who had an issue with a garage door is Staten Island, and wanted to replace the spring by DIY, and almost ended in a hospital.
Few years ago, when we still used to sell parts for “roller shutters” and garage door parts near Staten Island, We got a call from someone who asked for torsion springs for a commercial roller shutter. We asked what size of springs he need, and we supplied him with the requested springs. The next day we received a call from an angry man who said that the springs we sold him are damaged and that he want his money back. We asked him to relax, explained to him that we supplied him with the right springs, and told him that after 20 years of repairing “roller shutters” near Staten Island, we know which spring is needed. We told him that we are sending someone to help him install the new springs.
When our technician arrived, he asked him to show him what did he do, and the technician immediately recognized the mistake, which is often being made when an amateur try to install torsion springs. He had a low-headroom overhead door, and needed to install the springs in a different way. Luckily he didn’t got injured during the process, and the door did not damage. It took our technician, who repaired many “roller shutters” and overhead door near Staten Island 35 minutes to replace both springs, using the springs we supplied. And the door is working fine until today.
Emergency roller shutter repairs Staten Island
Big Apple Roll Up Doors Gates of New York New York provide a complete line of Commercial Rollup doors for any buildings or business in Staten Island and 5 Boroughs of NYC. We offer numerous innovative solutions when it comes to upward acting exterior and interior rolling gates and roller shutters.
Our selection of rolling doors include designs and options that are ideal for projects that call for high quality roller doors and parts, as every door we install in Staten Island is, and that have strict safety requirements, or simply need a high performing rolling gate designed for long life and superior strength. Our rollup steel doors have a long history of excellence in design for common to extraordinary applications that meet and often exceed the expectations of our wide range of domestic customers in Staten Island New York.
Overhead rollups, warehouse rolling gates and parking lot gates are among some of our daily servicing for commercial rolling steel doors repair in Staten Island. Our highly skilled team of experts will diagnose and fix any issues you may be dealing with and you can rely on our extensive work history and our experience to get the job done right! Rolling gate in Richmond County, or commercial roller door repair Brooklyn, our experts can help you get the job done today.